In this video we will take you through all the steps to set up your AirBox and Mounting kit!

Start by inflating your AirTrack! For that, we have a dedicated video in our AirTrack Factory Academy series.

Make sure to watch the ‘How to inflate your AirTrack’ video. Take the AirBox out of its bag. Inflate each part individually. When inflating, make sure the pin inside the valve is pressed out! This ensures that air will go in but automatically hold its air when the blower is disconnected from the valve.

For a firm connection to the AirTrack, pick a spot on which you’d like to build the AirBox, and put the Mounting Kit underneath the AirTrack. The D-rings should be facing down to the floor and the Mounting Kit sheet should be placed nice and centered.

Put in the valve with a twisting motion and turn on the blower. Don’t worry about over-pressuring it. Our blowers can’t harm the equipment! Take out the blower and feel if the AirBox is firm but soft to the touch.

Repeat for all AirBox parts. Place the AirBox parts on top of the Mounting kit. It’s extra safe to use the Velcro strips in between each AirBox part for a strong connection. Use the Mounting kit straps to secure the AirBox to the AirTrack. That’s it! You’re now ready to use the AirBox! Train safe, have fun, level up!